Japan Certification

Certification Overview
PSE attestation(Product Safety of Electrical Appliance & Materials)，Is the Japanese government for market access system of electronic electrical products，Japan's "electrical product safety law (hereinafter referred to as" Ann method "DENAN) important content。On April 1, 2001，Japan's revised the Ann method，By METI (METI) management，METI does not directly issue the certificate，But the authorized third party certification body for product conformity assessment test and issue a certificate。

METI authorized Japanese electrical safety, and environmental technology research laboratory (JET) and Japan quality appraisal institutions (JQA)，As a qualification certification bodies (CABs)，According to the laws and regulations for electrical and electronic product testing and certification，forMarket regulation。Furthermore, Institutions such as TUV, UL, CQC also qualification certification body.

According to the regulations, All controlled electrical and electronic products before manufacturing or exported to Japan, need to declare to the Japanese economy industry minister proposed business, And labeled with PSE mark on the product in accordance with the regulations. Ann method, class A and class B products need to be labeled with PSE diamond and PSE circular marks respectively. There are two kinds of applicable standards:
Province to 1: domestic standards (including EMI standard)
Province has 2: J standard (excluding EMI standard) = IEC standard + Japanese differences

scope
So far a total of 457 kinds of products within the scope of the electrical product safety control. Which easy to cause electric shock, fire and other accidents, the greater danger there are 116 kinds of products, classified as "specific electrical products - known as class A electric products", Such as chargers, adapters,The rest of the less harmful 341 kinds of products are classified as "the specific electrical products - known as the class B electrical products", most of the size of home appliances products, lamps and lanterns, lithium batteries belong to a class B.

A kind of product range (116)	A class B product range (341)
1. electric wire	1.Wire (except class A)
2.fuse protector	2.Fuse (except class A)
3.Wiring Devices	3.Wiring devices (except class A)
4.Current current limiter	4.Transformer (except class A)
5.transformer	5.Small ac motor
6. Electric appliances (electric water heater, electric steam bath)	6.Electric appliances (electric kettle, electric blanket, electric cooker, etc.)
7. Electric power used mechanical apparatus (pumps, electric toys, Refrigerated display cabinets, ice cream machine, electric massager)	7.Electric power application of mechanical appliances (refrigerators, juice machine, Electric fans, washing machines, air conditioners, electric drills)
8.Should electronic instrument equipment (high frequency hair removal device)	8.Should electronic instrument equipment (radio, TV)
9.Communicate with electrical mechanical equipment (dc power supply, electric shock insecticidal, magnetic therapeutic appliances)	9.Communicate with electrical mechanical equipment (alarm, dimmers)
10.Carry the generator	10.The light source used mechanical apparatus (LED lamps, desk lamp, fluorescent lamp and incandescent lamp)
	11.The lithium battery

Application Process
1.     Customers to prepare samples and data submitted to Waltek
2.     Waltek lab for testing, if the PSE is circular, the declaration letter issued by walter
3.     In view of the PSE diamond, inspection is required
4.     After testing and inspection by his agency PSE diamond certificate issued

Certification Mark


other information
 Technical information: voltage frequency AC 100 v / 200 v, 50 hz / 60 hz, plug JIS 8303
Whether mandatory: mandatory
The validity of the certificate: according to the diamond, 3 to 7 years, based on the product.According to circular, no valid, no certificate, can only be issued VOC
Inspection requirements: according to the diamond, only for the first time inspection, not careful.In view of the circular, no inspection requirements
The holder requirements: according to the diamond, the factory/importers.In view of the circular, no request

S-Mark voluntary  attestation
S - signs are applicable to all electrical and electronic products, covering the PSE certification scope.Recommend a class B product and product application is beyond the scope of PSE certification.Although it is voluntary certification, but now more and more manufacturers favor using S - Mark to gain market competitive advantage, is similar to the German GS.S also covers Safety and EMC.JET and JQA current can be S - the certification Mark, the logo of the S - respectively JET Mark and S - JQA Mark.

range of products
All electrical and electronic products

Application Process
1.     The customer to prepare samples and information, application submitted to Waltek
2.     Waltek submitting samples to the lab test
3.     Test at the same time to arrange inspection
4.     His agency audit test report and inspection report, approval, issue the certificate of S - mark

labelling requirement


other information
 Technical information: voltage frequency AC 100 v / 200 v, 50 hz / 60 hz, plug JIS 8303
Whether mandatory: voluntary
The validity of the certificate: no valid, careful to maintain effectiveness
Inspection requirements: inspection and inspection for the first time
The holder requirements: no requirement

Japan's wireless authentication
TELEC Certification
Japan certification for Radio frequency Equipment called Radio Equipment Type Approval, the official control organization is Japan's Communications Ministry MIC (Ministry of Internal Affairs and Communications), the main certification body is appointed by the MIC TELEC (Telecom Engineering Center), and such as RF Technologies/JQA/SGS/ITS/TUV/UL, etc, a total of 12 his body, so often referred to as the TELEC certification, or MIC certification, certification of the RF.

TELEC certification is mandatory, and some similar to the domestic SRRC.This certification follow Japan waves act (Radio Law), the specific test specification is to follow the MIC (Japan's communications ministry) Notice No. 88 regulations.According to Japan's "wave law" requirements, production, sales in Japan, run, wireless devices, must comply with the technical regulations approved by MIC, and forced to apply for radio equipment type approval certificate (namely TELEC certification).

JATE Certification
JATE certificate Is for the Japanese public telecom network equipment to implement compulsory certification.Japan's public management and interior communications, postal and Telecommunications (MPHPT) Telecommunications Business Law in Japan (Telecommunications Business Law), the Japanese telecoms equipment compulsory certification.Telecommunications business in 1985, the legal provisions in article 68, MPHPT authorized qualified agency to implement technical conditions of qualified acceptance.

JATE MPHPT authorization (Japan Approvals Institute for Telecommunications Equipment) as a qualified agency to implement qualified acceptance, so we used to call Japan's Telecommunications Equipment certification JATE certificate.JATE approval need to put in product authentication marks, certification marks using serial number.Recognition of the product, the applicant, products, certification number and other relevant information will be in the government gazette and JATE announcement on the website.

VCCI Certification
VCCI emc certification marks is Japan, by Japanese electromagnetic Interference Control commission (the Voluntary Control Council for Interference by Information Technology Equipment) management, Information Technology based on assessment of CISPR 22 whether products conform to the requirements of the VCCI.VCCI certification is not mandatory, but of information technology products sold in Japan, generally will be required to VCCI certification, it is a symbol of the quality of the product.Manufacturers should apply as a member of the VCCI first, just can use VCCI logo.In order to get VCCI recognition, EMI test report must be provided by the VCCI registration issued by recognized testing institutions.Through VCCI standard products will allow the product to put the correct VCCI label.Product level of A volume label need to show that the product conforms to the RF radiation terms, on the other hand, B grade product only shows the basic VCCI logo symbol.

product range
TELEC certification: wireless devices
JATE certification: communications equipment
VCCI authentication: the IT information technology equipment

Application Process
1.     Customer to prepare samples and information, application submitted to Waltek
2.     Waltek test
3.     His agency review test report, after approval, issue the certificate

labelling requirement


other information
Technical information: voltage frequency AC 100 v / 200 v, 50 hz / 60 hz, plug JIS 8303
Whether or not mandatory:
TELEC certification: mandatory
JATE certification: mandatory
VCCI certification: voluntary
The validity of the certificate: no expiration date
Inspection requirements: no requirement
The holder requirements: no requirement