Waltek Service - Waltek Testing Group Co.,Ltd.

You are here: Home > Service > International Certification > Other National Certification
Service

Taiwan Certification

BSMI
Certification Overview
The ministry of economic affairs the bsmi to develop a set of quality management system, be responsible for sales in Taiwan, or any commercial purpose of products to be imported (including electrical appliances) legal inspection and testing. BSMI is ministry of economic affairs in Taiwan the BSMI English Bureau of Standards, Metrology and Inspection .According to the ministry of economic affairs proclamation, from July 1, 2005, in Taiwan products to implement the two aspects of electromagnetic compatibility and safety regulation.2009 years later, he energy efficiency requirements for air conditioners and refrigerators, control shall be incorporated into the BSMI.

BSMI certificate holder must be a local company in Taiwan, test report must be issued by the BSMI approved laboratories within the territory of Taiwan, generally with the tariff number don't CCC code to determine whether to BSMI control range, general CCC code shall be provided by vendor.CCC code, Standard Commodity Classification number column of The Republic of China (Standard Classification of Commodity of The Republic of China code), similar to The H.S code.

According to the different products and certification requirements, BSMI totally is divided into the following three authentication mode:
1.Type Approval (TA, Type Approval)
Electronic product, apply motor shell and tube EMC + Safety.On November 1, 2002 began, replace the electromagnetic compatibility EMC MS management system.Applicable to the production of a variety of products manufacturers, adopt the method of batch-by-batch inspection, customs stock every time need to charge the inspection fee.Certificate valid for 3 years, can be a renewal of museum pass.

2.Login validation (RPC, Registration of product Certification)
Electronic product, apply motor shell and tube EMC + Safety.Implemented on January 1, 1999.Applicable to the production of single product and must be long-term sales of manufacturers, subsequent customs stock do not need to charge fees at a time.Need to pay annual fee each year.Certificate valid for 3 years, can be a renewal of museum pass.

3.Statement of compliance (DOC, Declaration of Conformity)
Customer declare yourself, to apply to the BSMI for payment.Applies only to information technology equipment components products, shell and tube EMC + Safety.On January 16, 2000.Certificate of permanent, but likely due to long time to replace the standard need to retest.

product range
Product scope according to the authentication model, three different authentication mode, control different product range, basic TA and PRC control products, DOC control products and TA/PRC don't overlap.Details are as follows:
1.Type Approval (TA, Type Approval)
control products and consistent with the PRC.
2.Login validation (RPC, Registration of product Certification)
Control 148 kinds, including electric blanket, fan, air conditioner, refrigerator, washing machine, water machine, dishwasher, electric motors, juicer, water heater, electric iron, induction cooker, switches, plug sockets, wire and cable, textiles, lamps and lanterns, etc.
3.Statement of compliance (DOC, Declaration of Conformity)
Control 30 kinds, typewriter, cash registers, electronic calculators, disk drives, camera/camera, U disk, mobile hard disk, cd-rom, etc.

Application Process
1.     Customer to prepare samples and information
2.     Engineer to check the samples, data, sample OK, application submitted to Waltek
3.     Waltek the samples and data submitted to Taiwan cooperation lab for testing
4.     Lab report submitted to the BSMI, BSMI certificate issued by

certification mark
Logo can be printed by the manufacturers themselves, scaling, can be printed on the product itself or on the packaging or tags.R3A001, for example, R is for authentication mode is RPC, 3 on behalf of the inspection area code, and A001 is serial number code, issued by the inspection bureau.Identifier can mark in the test mark below or to the right, below sample:


other information
 Technical information: 110/220 v AC voltage frequency, 60 hz
Whether mandatory: mandatory
The validity of the certificate:
1.     The Type Approval (TA, Type Approval) : the certificate is valid for 3 years, can be a renewal of museum pass.
2.     Login validation (RPC, Registration of product Certification) : the certificate is valid for 3 years, can be a renewal of museum pass.
3.     Statement of compliance (DOC, Declaration of Conformity) : permanent effective certificate, but may need to remeasure due to long time to replace the standard.
Inspection requirements: general without inspection.Landing only for validation (2 + 4/5/6/7 model), can provide conforms to the requirements of ISO certificate of exemption from inspection.
The holder requirement: need to Taiwan local registered company or the holder of the local agent

Introduction Of  Taiwan NCC
NCC is Taiwan National Communications Commission National Communications, short for themselves, as its name controlled wireless authentication.Accommodate the convergence of global digital development and trend of management innovation, and integration of the existing communication and transmission distributed situation, the government in 87 executive eighth electronic, information and telecommunications strategy sessions (SRB) meeting advice, planning telecom information integration supervision organs.Set up the commission (NCC) of the two bills - communications in the basic law and the national communications committees have been respectively in January 7, 1993, and on November 9, 1994, the promulgation and on February 22, 1995 formally established the national communications commission.

NCC rules all telecommunications terminal equipment, and low power radio controlled telecommunications radio-frequency devices require form endorsed later, can sell in the market.

Control products
NCC mainly controls the following two types of products:
Telecommunications terminal equipment validation (Telecom) of the project:
1. The public switched telephone network (PSTN) : telephone/phone/automatic alarm equipment recorder/fax/remote control/phone cable wireless main machine/user should bring along their own switches/buttons telephone system/computer telephone integration equipment/data/call display terminal equipment / 2.4 GHz radio frequency (rf) telecommunications terminal equipment/VoIP network telephone.
2. The land mobile communication networks (PLMN) : radio call system terminal equipment/action/relay type wireless data terminal equipments that telephone/GSM mobile telephone and terminal equipment / 1880 ~ 1895 MHZ wireless special switch and terminal equipment/DCS1800 mobile telephone and terminal equipment/action of the third generation communication terminal equipment.

Products low power radio (RF) :
1. Working frequency 1 GHZ under low power radio frequency motor.
2. The working frequency of not less than 1 GHZ, low power radio but using frequency hopping (frequency hopping) or digital modulation (digitally modulated) of the equipment.
3. Wireless Information transmission equipment (Unlicensed National Information Infrastructure) or adopting frequency hopping (frequency hopping) or digital modulation.

Application Process
1.     The customer to prepare samples and information, application submitted to Waltek
2.     Waltek the samples and data submitted to Taiwan aptitude lab for testing
3.     Taiwan qualification of laboratory test, the test after the completion of the issue the test report, and submit the report to NCC
4.     NCC audit report and other application documents, there is no problem after the issuance of certificates of NCC

Certification Mark

1, NCC marks: NCC LOGO must be greater than 15 mm.
2, tags: must be labeled with the product itself, if the product is too small, can be printed on the smallest package.

CC XX xx YY yyy Z z W
XX: Certificate Body his agency
Xx: Year Year
YY: LP (the Lower Power Device) low Power equipment
Yyy: Serial Number/Serial Number
Z: Series Number Number
Z: Mode models
W: the Check Code Check Code

other information
Technical information: 110/220 v AC voltage frequency, 60 hz
Whether mandatory: mandatory
Certificate valid for 5 years
Inspection requirements: no
The holder requirements: Taiwan factory/manufacturer/importer can be licensed, if the applicant is not the Taiwan company, then the applicant must be the manufacturer or the identity of the factory.

Top